1. If
the following dialog box appear asking to “re-run the software”, it indicates digimaster3 was not
registered and can’t be used, the tested digimaster3 will not show this error.
2.digimaster3 Start up machine, it displays digimaster3 Basic Information: 0 tokens- means no tokens limitation, digimaster3 supports free upgrade online and no need user name and password.
3.
I will show how to adjust the mileage, take Toyota Camry mileage adjust for
example, firstly find the basic information for Toyota Camry mileage correction
in the “digimaster3
vehicle list.xl” as follows, it needs to use OBP adapter, so find the OBP
adapter in the tool box, in the digimaster3 display screen, choose “Meter
System”.
4.
Select “Japan & Korea
5.
Select “Toyota
6.
Select “Camry”
7.
Show “C46″ as follows, it indicates to remove the Instrument and to find C46
chip. Note: the same as to the other cars models, when it displays chip model,
just to remove the Instrument and find the corresponding chip model.
8.
The following picture tells the position of dip 93c46, now remove dip 93c46.
Note: be careful not separate chip angle and
make sure not short-circuit.
9.
Let’s see what’s the removed 93c46 chip like.
10.
Insert the chip in the right position and connect the OBP, (Note: notice 93C46
direction).
11.
Click “Next”, read out Chip mileage value 80KM, select “Yes” to adjust the
mileage value you want.
12.
For example, in the box “Adjusting mileage”, enter 4567, and then click “OK”.
13.
Write Data succeed!
14. read
out the current mileage value to confirm whether it matches the mileage value
you just now adjusted.
没有评论:
发表评论